54
Transmission
* [Command1] :
To classify factory-adjustment mode
or user adjustment mode.
* [Command2] : To control LCD set.
* [Set ID]
: You can adjust the set ID to choose
desired monitor ID number in special
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every con
nected LCD set is controlled.
select ‘0’, factory adjustment.
(* Transmit as Hexadecimal code.)
* [DATA]
:
To transmit command data.
Transmit ‘FF’ data to read status of
command.
* [Cr]
:
Carriage Return
ASCII code ‘0x0D’
* [ ]
:
Added to classify command, set ID
and DATA.
* [Set ID], [Data] : Input command with 2byte.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The Monitor transmits ACK (acknowledgement) based
on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present
status data. If the data is data write mode, it returns
the data of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The Monitor transmits ACK (acknowledgement) based
on this format when receiving abnormal data from
non-viable functions or communication errors.
* Data : [01] : illegal code (This command is not supported.)
[02] : not support function (This function doesn’t work.)
[03] : wait more time (Try again a few minute later.)
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving Protocol
01. Power (Command:p)
G
To control Power On/Off of the Monitor.
Transmission
Data 0 : Power Off
1 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : Power Off
1 : Power On
[a][ ][Set ID][ ][OK][Data][x]
G
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
Data 0 : Power Off
1 : Power On
* In like manner, if other functions transmit ‘FF’ data
based on this format, Acknowledgement data feed
back presents status about each function.
[a][ ][Set ID][ ][OK][data][x]
02. Input select (Command:b)
G
To select input source for the Monitor.
You can also select an input source using the INPUT
SELECT button on the Monitor's remote control.
Transmission
Data 0 : RGB1
4 : RGB2
1 : Component
2 : Video
3 : S-Video
[k][b][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 0 : RGB1
4 : RGB2
1 : Component
2 : Video
3 : S-Video
[b][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
