Owner’s Manual 7
Introduction
Controls
Controls
Connection Options
Connection Options
RS-232C INPUT
(CONTROL/SERVICE)
Y
P
B
P
R
AC INPUT
AUDIO INPUT
( )
( )
( )
( )
EXTERNAL SPEAKER
DVI INPUT
RGB INPUT
RGB OUTPUT
S-VIDEO
AUDIO
VIDEO
MONITOR
OUTPUT
VIDEO
R
L
AUDIO
COMPONENT INPUT 2
COMPONENT INPUT 1
REMOTE
CONTROL
A/V INPUT
R
L/MONO
R
L
5
1.
REMOTE CONTROL
Connect your wired remote control to the remote control
port on the Monitor.
2.
RS-232C INPUT (CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
3.
DVI (Digital Visual Interface) INPUT/
AUDIO INPUT/ RGB INPUT JACKS
Connect the monitor output connector from a PC to the
appropriate input port.
4.
RGB OUTPUT PORT
You can watch the RGB signal on another monitor, connect
RGB OUTPUT to another monitor’s PC input port.
5.
DVD/DTV Input (Component 1-2)
Connect a component video/audio device to these jacks.
6.
Monitor Output
Connect a second Monitor.
Audio/Video Input
Connect audio/video output from an external device to
these jacks.
7.
S-Video Input
Connect S-Video out from an S-VIDEO device to the S-
VIDEO input.
8.
EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to ‘Speaker & Speaker
Stand’ manual.
9.
POWER CORD SOCKET
This Monitor operates on an AC power. The voltage is indi-
cated on the Specifications page. Never attempt to operate
the Monitor on DC power.
Back Connection Panel
Back Connection Panel
VOLUME
INPUT
SELECT
ON/OFF
Main Power Button
INPUT SELECT Button
VOLUME (
F
F
,
G
G
) Buttons
Remote Control Sensor
Power Standby Indicator
Illuminates red in standby
mode. Illuminates green when
the Monitor is turned on.
Sub Power Button
Front Panel Controls
Front Panel Controls
1
3
4
2
7
8
6
- This is a simplified representation of a typical front panel.
The Front Panel Controls shown here may be somewhat different from your monitor.
9
