Owner’s Manual 33
External Control Device Setup
26. ISM Method (Command2:p)
G
To avoid having a fixed image remain on screen.
Transmission
Data 0: Normal
1: White wash
2: Orbiter
3: Inversion
[j][p][ ][Set ID][ ][Data][Cr]
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
27. Low Power (Command2:q)
G
To control the low power function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
[q][ ][Set ID][ ][OK][Data][x]
[j][r][ ][Set ID][ ][Data][Cr]
[r][ ][Set ID][ ][OK][Data][x]
[j][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
30. Picture Size Setting for Double Window
mode (Command2:t)
G
To adjust main window size in Double Window mode.
Transmission
Data Min: 0 ~ Max: 20
•
Refer to ‘Real data mapping1’. See page 30.
[j][t][ ][Set ID][ ][Data][Cr]
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
31. Auto Configure (Command2:u)
G
To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
Data 1: To set
[j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0: Low power off
1: Low power on
Acknowledgement
28. Orbiter Time Setting (Command2:r)
G
To adjust orbiter operation time term.
Transmission
Data Min: 1 ~ Max: FE
Acknowledgement
29. Orbiter Pixel Setting (Command2:s)
G
To adjust pixel number in orbiter function.
Transmission
Data Min: 1 ~ Max: 9
32. Send IR Code (Command: m c)
G
To send IR remote key code
Transmission
Data
Key code: Refer to page 35.
[m][c][ ][Set ID][ ][Data][Cr]
[c][ ][Set ID][ ][OK][Data][x]
Acknowledgement
