background image

6

QUICK START

ENGLISH

Dehumidifier efficiency varies depending on room tempera-
ture and relative humidity.

• A lower temperature and lower relative humidity will reduce the moisture removal rate. 
• The compressor operates in dehumidification mode only when the set humidity is lower than the

room humidity.

The operating temperature is 5°C to 32°C. 

• The dehumidifier cannot be used at 0°C or below because the dehumidified water could freeze. 
• At 32°C or higher, the dehumidifier may stop running automatically to protect itself from over-

heating. 

The room temperature increases while the dehumidifier is
running.

• This dehumidifier does not have temperature control functions.
• The dehumidifier generates heat while operating, raising the room temperature by about 2°C or

3°C depending on the usage conditions (room air pressure and room size).

The dehumidification can be restarted after three minutes.

• If you attempt to restart the dehumidifier immediately after stopping it, the compressor will start

running again after about three minutes for product safety reasons.

QUICK START

Summary of Contents for MD16GQSA1































Reviews: