5
The
DISPLAY
will count down from 30
seconds. When it reaches 0, BEEP sounds.
Open the oven door and test the temperature of the
water. If your oven is operating the water should be
warm.
Be careful when removing the container it may
be hot.
YOUR OVEN IS NOW INSTALLED
Fill a
microwave safe container
with
300 ml (1/2 pint) of water. Place on
the
GLASS TRAY
and close the oven door. If you
have any doubts about what type of container to
use please refer to page 21.
Press the
3
button one time,
then
0
button one
time to set 30
seconds, then
press the
START
button. Your oven will start.
Open your oven door by pulling the
DOOR HANDLE
.
Place the
ROLLER REST
inside the oven and place the
GLASS TRAY
on top.
Plug your oven into a standard household socket.
Make sure your oven is the only appliance
connected to the socket.
If your oven does not operate
properly, unplug it from the electrical socket and then plug it
back in.
