Test running
22
Ventilator
Method to operate and select air volume – Interlinked operation with ventilation.
Press button on the remote
controller control panel.
- It is only used when air conditioner
and general ventilation is
interlinked.(‘Interlinked operation’ displayed
on the remote controller display)
1
Pressing 'Start/Stop' button at ventilation
mode will start ventilation.
2
Pressing button will change the
ventilation operation mode.
Pressing operation selection button
will change the mode in the order of
'heat exchange
→
normal
→
automatic'
❈
It only displays on the remote controller
display when it is in ventilation mode, and it
displays the desired temperature when it
returns to air condition mode.
3
Pressing button in general
ventilation mode will change airflow
speed.
Pressing airflow speed button will
change the mode in the order of 'weak
→
strong
→
very strong'.
If CO
2
sensor is installed, it can select from 'weak
→
strong
→
very strong
→
automatic'.
4
Changing back to air conditioner mode
1)Automatic conversion : when no button is
pressed for 15 seconds or longer, it
automatically converts back to air
conditioner mode.
2) Manual conversion : pressing button in
ventilation mode will manually convert.
5
Ventilation interlinked operation
It is used when air conditioner is interlinked with ventilation product.
It is a function that cools and refreshes indoor air using the ventilation product at the same time
operating the air conditioning function.
Test running
Summary of Contents for LZ-H025GBA4
Page 25: ......
