
7. To remove the Thermal limiter, Convection motor,
and Bake Element from the lower oven Follow
the steps as follows.
Remove Lower rear cover.
1) To Remove Thermal Limiter (Double Line Brake
Lower), remove the screw and 2 wire leads.
THERMAL LIMITER
• To shut down the control power transformer
The upper thermostat is located in front of the
upper cooling fan. It opens at 356°F/180°C and
closes when the oven temperature cools below
14°F/-10°C.
The lower thermostat is located next to lower
bake element. It opens at 320°F/160°C and
closes when the oven temperature cools below
14°F/-10°C.
2) To remove the convection motor assembly
(refer to the following page 3-8)
3) To remove Thermal limiter, remove the 2
wires and 1screws.
THERMAL LIMITER
• To shut down the heaters
The thermostats are located at the back of the
oven next to each broil element and wired in
series with each Double Line Break relay.
The upper oven thermostat opens at 356°F/
180°C and the lower oven thermostat opens at
284°F/140°C (Reclose Temp. : -31°F/-35°C).
3-10
DISASSEMBLY INSTRUCTIONS(LOWER)
Thermal limiter
(Double Line Break_Lower)
Convection motor
Bake element
Thermostat
Rear cover
(Lower)
Summary of Contents for LWD3063BD
