
3-8
DISASSEMBLY INSTRUCTIONS(UPPER)
1) To Remove Thermal Limiter (Double Line Brake
Upper), remove the screw and 2 wire leads.
THERMAL LIMITER
• To shut down the heaters
The thermostats are located at the back of the
oven next to each broil element and wired in
series with each Double Line Break relay.
The upper oven thermostat opens at
356°F/180°C and the lower oven thermostat
opens at 284°F/140°C
(Reclose Temp. : -31°F/-35°C).
2) To remove convection motor assembly
Before removing the convection fan motor, first
follow the steps for removing Convection Heater.
a. Disconnect the 2 wire leads and remove the
3 screws from the motor bracket
b. Separate parts of cavity inner between cavity
outer properly.
(refer to the page3-5 About cavity inner
disassembly method)
3)
To remove the hidden bake element
a. Remove the Vent cover, Barrier bracket.
b. Disconnect the 2 wire leads, remove the
Bake element cover.
c. Cut the 8 points of
flange and remove
the Bake element
cover.
Mounting
Scews
(3ea)
Fan Cover
Scews
(4ea)
Outer
Inner
Cavity
Convection
Heater
Fan Blade
Fan Cover
Washer
Bushing
Nut
Fan Motor
Barrier bracket
Bake element cover
(upper)
Summary of Contents for LWD3063BD
