
2-6
SAFETY
1. SETTING THE CLOCK
1) Press CLOCK once.
2) Press the numbers to enter the correct time of
day. For example, to set 12:34, press the
numbers 1, 2, 3 and 4.
If the numbers are not pressed within 25 seconds
of pressing CLOCK, the display reverts to the
original setting.
3) Press START. This enters the time and starts the
clock.
2. START, CLEAR/OFF
1) START key to start oven
2) Select "OFF" to cancel a program during cooking
or erase during programming.
3. OVEN LIGHT [UPPER / LOWER]
1) Requirement: The Oven Light is used to turn on
or off the oven light.
2) Key Input Process: Oven Light operation.
If the Oven Light is on by pressing oven light key,
the light is on even if the door is closed. Oven
light key can be operated while door opens.
4. SETTING THE TIMER
(EXAMPLE TO SET 5 MINUTES):
1) Press UPPER or LOWER TIMER ON/OFF once.
0:00 with HR inside appears and TIMER flashes
in the display.
2) Press number 5.
0:05 appears in the display.
3) Press TIMER to start the Timer.
The display shows the set time counting down.
4) When the set time has run out, End shows in the
display. The indicator tones sound every 6
seconds until UPPER or LOWER TIMER ON/
OFF is pressed.
5. CONTROL LOCKOUT
1) The PROBE key controls the Control Lock
feature. The Control Lock feature automatically
locks most oven controls from being turned ON. It
does not disable the timer and the interior oven
light. The Control Lock feature will cancel the
cooking mode and will lock the oven controls at
any time when you activate this feature.
2) Key Input Process : PROBE (for 4 seconds)
Lock melody will sound.
3) To unlock the control, press PROBE (for 4
seconds)
Unlock melody will sound.
6. SPECIAL FUNCTION: 8 TYPES OF
CATEGORY
NOTE
If the remaining time is not in the display, recall
the remaining time by pressing the UPPER or
LOWER TIMER ON/OFF.
•
Set the time in seconds by pressing UPPER
or LOWER TIMER ON/OFF twice. (For
example, press 5 and 0 to set 50 seconds.)
•
Set the time in minutes by pressing UPPER or
LOWER TIMER ON/OFF once. (For example,
press 5 to set 5 minutes.)
1) CONVECTION AUTO CONVERSION
1. Press SETTING twice. AUTO appears in the
display.
2. Press 1 to enable or 2 to disable.
3. Press START to accept the change.
Summary of Contents for LWD3063BD
