12
INSTALLATION
Unit Installation
1
Carefully lift the air conditioner and slide it into
the open window. Make sure the bottom guide
of the air conditioner drops into the notches of
the L bracket.
2
While steadying the air conditioner, carefully
bring the window sash down behind the
upper guide of the air conditioner.
When the air conditioner is properly installed,
it should tilt slightly down at the back. If it is
set correctly in the window, it will hang lower
in the back automatically. If it does not, there
is a problem with the installation.
3
Extend the guide panels to fill the window
opening using 4 screws (Type B) to secure
them.
CAUTION
●
During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
Window Frame
Upper Guide
L Bracket
Bottom Guide
Center Line
Seal
About
(6.4mm)
¼"
8"
(203mm)
8"
(203mm)
4
Install the L bracket behind the inner
window sill, with short side of bracket as
shown. Use the 2 screws (Type A) provided.
The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.
NOTE
●
When the air conditioner drops into the L
bracket, the air conditioner will be centered
in window opening.
NOTE
●
L Bracket
Outer Sill
Inner Sill
Center Line
Inside
Outside
