LG LW6424 series Owner'S Manual Download Page 37

Page: 37 / 60

Operation and settings

4. Select the authority from the drop down list to provide

the access rights to each user and then click the [Save] to
confirm your selection.

Administrator: Allows you to operate setup menus
and to view live images.

Power user: Use of the limited functions of the
system (The Configuration menu is not allowed.) A
power user can use the Live View, OSD control and
audio functions.

Normal user: Provides the lowest level of access,
Allows to view live images only.

Custom user: The user can login and view the live
stream image only when the “Enable anonymous
login” option is checked to enable it.

Note:

Remember the password.

Edit the registered user

You can change the password or authority.

1. Choose the user ID and then click the [Edit] button.

2. Change the Password or Authority, then click the [Save]

button to confirm your selection.

Delete the registered user

1. Choose the user ID you want to delete.

2. Click the [Remove] button.

Note:

The default administrator user ID ‘admin’ is permanent and
cannot be deleted.

Anonymous

Enable anonymous login

Check the box to enable anonymous user login - allows the
user access for only viewing the live stream image.

Maximum RTP stream connection

Maximum number of simultaneous stream connection:

Set this number to limit the number of simultaneous stream
connections.

The connections depend on the stream configuration as
shown in the following Maximum RTP stream connection by
stream configuration.

Video Codec Resolution

Frame

Rate

Quality

Maximum

RTP

stream

H.264

1080p

HIGHEST

Up to 5

H.264

1080p

MEDIUM

Up to 10

H.264

720p

HIGHEST

Up to 10

MJPEG

1080p

HIGHEST

Up to 3

MJPEG

720p

HIGHEST

Up to 7

Note:

Preview window of the IP device setting and preset setting
are affected by this setting.

Save: Click this button to confirm the settings.

Summary of Contents for LW6424 series





























































Search results

Summary of Contents for LW6424 series

Reviews:

Related manuals for LW6424 series

Brands by name

Popular brands

LG LW6424 series, Owner'S Manual

Search results

Summary of Contents for LW6424 series

Reviews:

Related manuals for LW6424 series

Brands by name

Popular brands