Introduction
9
n
o
p
q
r
s
t
n
ETHERNET/POE
Port
Connects to a PC or a network via a hub with a
10 BASE-T/100 BASE-TX cable attached RJ-45 connector.
Note:
Power over Ethernet (PoE) is a technology that integrates
power into a standard LAN infrastructure. It enables power
to be provided to the network device, such as a network
camera, using the same cable as that used for network
connection. It eliminates the need for power outlets at the
device locations and enables easier application of uninter-
ruptible power supplies (UPS).
o
ALARM IN / ALARM IN RETURN
Provides physical interface for sensor.
ALARM OUT / ALARM OUT RETURN
Provides physical interface for Alarm/Relay.
p
AUDIO OUT (Line Level Output)
Connect to an active speaker with a built-in amplifier.
q
AUDIO IN (Line Level Input)
Input for a mono microphone, or a line-in mono signal.
r
Power input jack
Connects to a DC 12 V power supply using proper cables.
s
Camera mounting bracket
t
GORE
TM
protective sticker / Air vent system
Do not remove the GORE
TM
protection sticker. It helps the
flow of air to prevent moisture and condensation inside of
the camera. This air vent system helps the product’s reliabil-
ity and stability so it increases the life cycle.
Summary of Contents for LW6424 series
Page 60: ...BZ03 ...