45
4
O
pera
tion and settings
SmartIR setting
This function is used to protect the image saturation when the
object is detected at close range.
1. Select the [SmartIR] option.
2. Use or button to select [ON] and press . The area setting
menu appears.
> Use or to select an option then use or button
to adjust the option.
- HEIGHT: Increase or decrease the vertical size of the
area.
- WIDTH: Increase or decrease the horizontal size of
the area.
- MOVE Y: Moves vertical position of the area.
- MOVE X: Moves horizontal position of the area.
- EXIT: Select a mode and click button.
Note:
If the image saturation is appear, you can adjust the area by using
the area setting option.
3D-DNR setting
1. Select [3D-DNR] option.
If pictures are not clear due to noise, this option would reduce
the noise of picture.
2. Use or button to select an option.
Notes:
•
If you set the AGC to [OFF] on the [EXPOSURE] menu,
the [3D-DNR] function is not available.
•
When you use this function, the afterimage may occur.
Summary of Contents for LW5224R
Page 57: ...AB28 ...
