2.Expand both curtains to contact the window frame.
Install four wood screws 31/32”. Two in each upper
right and left of the curtains.
3.24000 BTU: Install three wood screws 31/32” in
the top mounting channel.
3.24000 BTU: Install three wood screws 31/32” in
the top mounting channel.
5.Install left&right installation bracket and as shown
in fig.Install bolt(2-1/2” long flat head bolt and
locknut) to the installation bracket and adjust them
to proper length,then use 6(
13/32”
)screws to fix the
bracket on the case.
4.Use three wood screw
31/32” to fix the case to windows
sash.
1.Place outer case in window. Lower sash until it
rests behind front flange of top rail.Bottom rail must
rest behind window sill.
Install Outer Case in Window
14500-18000 BTU:
24000 BTU:
NOTE: To make screws easier to drive, drill a
pilot hole into the sash through clearance hole
in curtains.
NOTE: Tilt the outer case about 1/2” down
towards the outside for proper condensate
water drainage.
6.Use a wood block between the leveling bolts and
the wall if the wall is weak or if the weight of the air
conditioner falls between the studs in the wall.
Summary of Contents for LW1512ER
