-3-30-
COMPONENT ACCESS
REASSEMBLY METHOD OF INNER DOOR GLASS :
1. See steps 1-2 on page 3-29)
REASSEMBLY NOTE : When you reinstall the Insulation around the oven
door glass, make sure that the insulation is not visible in the glass after the
door is reassembled.
REASSEMBLY METHOD OF HINGE HANGER :
1. Cover the inner assembly into the door frame.
2. Fasten 4 screws in the middle of door frame.
3. Place the door liner assembly on a padded work surface with the hinge
hangers over the edge.
4. Fasten 2 screws in the bottom of door fram
REASSEMBLING THE DOOR GLASS & HINGE HANGER(FOR THE LOwER DOOR)
4 screws
4 screws