-3-5-
1. Turn off the electrical supply going to the range.
2. Pull the controller from the range. (See page 3-4)
3. To remove the Main PCB, remove the bracket and remove the 3
screws of Main PCB and separate Main PCB after unplugging the
connectors.
4. Controller wire should be held by the wire holding structure of controller
assembly.
5. To remove the Key PCB assembly Remove the 7 screws of the Main
PCB supporter.
COMPONENT ACCESS
REMOVING THE MAIN PCB AND KEY PCB ASSEMBLY
Buzzer PCB Touch Bridge
PCB
Encoder
PCB
Bracket
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electrical shock.
WARNING
• Be careful when you work on the electric range
handling the sheet metal part.
- Sharp edge may be present and you can cut yourself.
- After complete separation of the Controller from the product,
please removed the PCB Assembly.
CAUTION