3-20
COmpONENT ACCESS
REmOvING & REpLACING ThE LIFT-OFF OvEN dOOR (For the Lower door)
To replace the door:
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, seat the
indentation of the hinge arms into the bottom edge of the hinge slots.
The notch in the hinge arms must be fully seated into the bottom edge
of the slots.
Hinge arm
Bottom
edge of slot
Indentation
3. Open the door fully. If the door will not open fully, the indentation is not
seated correctly in the bottom edge of the slots.
4. Lock the hinge locks, rotating them back toward the slots in the oven
frame until they lock.
Hinge arm
Hinge lock
5. Close the oven door.
CAUTION
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
- Doing so can result in personal injury as the door is very heavy.
LOWER OVEN
To remove the door:
1. Fully open the door.
2. Unlock the hinge locks, rotating them as far toward the open door frame
as they will go.
Slot
Lock
Unlock
Hinge
lock
3. Firmly grasp both sides of the door at the top.
4. Close the door to the removal position (approximately five degrees)
which is halfway between the broil stop position and fully closed. If the
position is correct, the hinge arms will move freely.
about 5°
5. Lift door up and out until the hinge arms are clear of the slots.
Summary of Contents for LUTE4619SN
