3-13
COmpONENT ACCESS
REmOvING ThE BROIL ELEmENT (For the Lower oven)
5. To remove the broil element:
a) Remove the 4 screws from the front and rear brackets.
2 Front bracket screws
2 Rear bracket screws
b) Pull the element forward.
WARNING
• DISCONNECT power supply cord from the outlet
before servicing.
• Replace all panels and parts before operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death or
electric shock.
CAUTION
• Use caution when handling sheet metal parts
while servicing the range.
- Some parts may have sharp edges, which could result in injury.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from inside the oven.
3. Remove the back cover (see page 3-2 for the procedure)
4. Unplug 2 terminals at each point
2 Terminals
Summary of Contents for LUTE4619SN
