Preparation
9
2
P
repar
ation
When alarm inputs are supplied via the alarm input
connector on the camera, the camera sends output
signals via the alarm output connector on the camera.
•
Controls by General Controller
This camera can be controlled by RS-485. Especially the
camera has an excellent cost-saving effect because it
can be controlled by the general RX point of contact
signal.
•
Connects with the maximum 256 cameras
This camera can be utilized after being connected
with maximum 256 cameras. Therefore, it is capable of
performing an excellent job in the large buildings or
department stores.
•
Day & Night Function
This camera can be selected Color or Black & White. You
can set Color in the daytime and Black & White at night
due to the low illumination. (Filter Conversion type)
•
DSS (Digital Slow Shutter) function
It is possible to highly sensitive surveillance because of
DSS(Digital Sl ow Shutter) function.
•
WDR (Wide Dynamic Range) function
The camera can be best condition to watch easily
inside or outside in the strong back light.
•
Power Supply
This camera must always be operated a AC 24 V.
Certified/Listed, class 2 power supply only.
Accessories
For LT923NI/PI series
RJ-45 Adapter cable
For LT923N/P series
Camera main cable
RJ-45 adapter cable
Wrench
PIPE Installation Bracket
Summary of Contents for LT723 Series
Page 56: ......
