Installation
15
3
Ins
talla
tion
ALARM output connections
Connect the alarm device to the alarm output data port.
Alarm signal output at an event occurrence. You can set the
Alarm Output to the normal open or normal close mode.
1. Connect the RJ-45 Adapter cable to the PORT B (RJ-45)
cable of the camera.
2. Connect the alarm device to the RJ-45 Adapter cable.
When connecting lines, check and connect the color
lines of the each device correctly. Refer to the below
tables for color line information.
Alarm Out connection
E
D
C
B
A
G
F
H
PORT B
RJ-45 Adapter cable
Alarm device
Alarm device
Alarm device
Alarm device
Alarm device
Alarm device
Alarm device
Alarm device
RJ-45 Adapter cable
Port B
RJ-45 Adapter cable
No
Description
Color
A
ALARM OUT [NO1]
White
B
ALARM OUT [COM1]
Orange
C
ALARM OUT [NC1]
Black
D
NC
Red
E
ALARM OUT [NO2]
Green
F
ALARM OUT [COM2]
Yellow
G
ALARM OUT [NC2]
Blue
H
NC
Brown
PORT B of the LT913/713NI/PI series
Description
Color
ALARM OUT [NC1]
Blue
ALARM OUT [COM1]
Violet
ALARM OUT [NO1]
Brown
NC
ALARM OUT [NC2]
Gray
ALARM OUT [COM2]
Orange
ALARM OUT [NO2]
Black
NC
PORT B of the LT913/713/N/P series
Description
Color
ALARM OUT [NO1]
White Blue
ALARM OUT [COM1]
Beige
ALARM OUT [NC1]
Black
NC
ALARM OUT [NO2]
Brown
ALARM OUT [COM2]
Red
ALARM OUT [NC2]
Orange
NC
