39
Operation and settings
Master / Slave
>
RTP unicast: When enabled the transmis-
sion of the data to the specified equipment
happens on a network specifying a single
address.
>
RTP multicast: When enabled it reduces the
transmission load on the camera by making
the computer of the same segment network
receive the same transmission data. When
multicast option is checked then select
Video Port number, Audio Port number and
Data port number.
-
Video RTP port: Specify the video
transmission port number used for the
multicast streaming. It is initially set
to 8 888 and you can edit this between
1 025 and 65 534.
-
Audio RTP port: Specify the audio port
number used for the multicast stream-
ing. It is initially set to 7 777 and you
can edit this between 1 025 and 65 534.
-
Data RTP port: Specify the VA data port
number used for the multicast stream-
ing. It is initially set to 6 666 and you
can edit this between 1 025 and 65 534.
-
IP address: Set the IP address for RTP
multicast.
Note:
Each stream using multicast needs its own
a pair of multicast IP address and port num-
bers to avoid address conflict.
•
Save: Click this button to confirm the settings.
Summary of Contents for LSW900 series
Page 72: ...BZ03 ...
