LG LSW900 series Owner'S Manual Download Page 32

Page: 32 / 72

Operation and settings

PTZ protocol
Allows the user to configure to different PTZ controls by

using different PTZ protocols.

PTZ protocol list

PTZ protocol: Displays the selected PTZ

protocol.

Edit: Click to display the PTZ protocol win-

dow. Select the PTZ protocol and then click

the [Save] button. If you want to delete the

protocol, click the [Remove] button.

Upload PTZ protocol

Follow the instructions below to upload PTZ protocol.
1. Click the [Browse] button, find and open the file

and then click [Upload] button.

2. Click the [Add PTZ protocol] button and then the

PTZ protocol will be added.

PTZ configuration

Enable: Click to use the PTZ protocol.

Camera ID: Enter the PTZ device ID. Make the

same ID as the PTZ device.

Pan speed: Enter the panning speed of the

PTZ device in the edit box. Default value for

the LG Multix Protocol is 60 and ranges from

0 to 127.

Summary of Contents for LSW900 series









































































Search results

Summary of Contents for LSW900 series

Reviews:

Related manuals for LSW900 series

Brands by name

Popular brands

LG LSW900 series, Owner'S Manual

Search results

Summary of Contents for LSW900 series

Reviews:

Related manuals for LSW900 series

Brands by name

Popular brands