62
Shroud Housing
Shroud
HOW TO DISASSEMBLE AND ASSEMBLE
8-1. F –LAMP CASE
8-2. F –SHROUD ASSEMBLY
1) Loosen the two screws and remove
the lamp case.
2) Separate a housing and remove F-
lamp case.
1) Remove the F-lamp case.
And 2 screws marked in red.
2) To remove the Multi-Duct: 1st pull out then down then
out again.
Caution this has a tight fit, so it is necessary to pul with
some force.
3) Assembly is reverse order.
3) Separate multi duct.
NOTE
– turn the multi duct when remove it.
NOTE
– At step
push the multi duct strongly.
(Because it is tight fit.)
5) Separate a housing as remarked.
6) Remove 2 screws marked in red.
And separate shroud on the way of
picture below.
7) Separate the housing as remarked.
8) When you assemble multi duct, please refer
to below instruction.
Insert the housing of multi duct.
As like above picture, please hold up back
of multi duct.
Then push as shown as shown below steps.
