59
HOW TO DISASSEMBLE AND ASSEMBLE
5. HANDLE
6-1. DISPENSER DISPLAY
1) HANDLE REMOVAL
To move the refrigerator through
a house door, it may be necessary
to remove the refrigerator door handles.
Note
:
Handle appearance may vary from
illustrations on this page.
Loosen the set screws with a 2.5mm (3/32”)
Allen wrench and remove the handle.
Note
:
If the handle mounting fasteners need to
be tightened or removed, use a 1/4"
Allen wrench.
Place the handle on the door by aligning
handle footprints to fit mounting fasteners
and tighten the set screws with a
2.5mm (3/32 ) Allen wrench.
2) HANDLE REINSTALLATION
Note
:
If the handle mounting fasteners need to
be tightened or removed, use a 1/4"
Allen wrench.
2) Separate housings and remember the pair to prevent
Miss assembly.
1) As below picture, separate part
from unit and Pull part
3) Loosen two screws pointed in red, separate one housing,
separate water-supply-pipe from hook.
Mounting
Fasteners
Mounting
Fasteners
Set Screw
Allen Wrench
