LG LSN3AT5D, Owner'S Manual

Page: 37 / 44

Mount the installation plate horizontally by
aligning the centerline using a level.
A
Mount the installation plate on the wall with
four type A screws. If mounting the unit on a
concrete wall, use anchor bolts.
The wall you select should be strong and solid
enough to prevent vibration.
B
Measure the wall and mark the centerline. It
is also important to use caution concerning
the location of the installation plate-routing of
the wiring to power outlets is through the
walls typically . Drilling the hole through the
wall for piping connections must be done
safely.
Drill the piping hole with a ø70mm hole core
drill. Drill the piping hole at either the right or
the left with the hole slightly slanted to the
outdoor side.
Indoor
WALL
Outdoor
5-7mm
(0.2~0.3")
CAUTION
Ma ke su re th at th e d ril le d h ole in th e w all is
pro pe rly s ea le d ( us in g a pro pe r s ea la nt, fo r
ex am ple ce me nt, pla ste r o f p ari s e tc .) aft er
pa ss in g t he in sta lla tio n p ip e, dra in ag e p ip e
an d th e in te r c on ne cti ng ca ble .
INST ALLA TION OF INDOOR & OUTDOOR UNIT
How to fix installation plate Drill a hole in the w all
Outdoor Unit
Drain Pipe
Drain Pan
Drain pan along with drain pipe (as
shown below) can be used to drain
the water accumulated in the outdoor
during the Heat Mode.
Left rear piping Right rear piping
Hole center
ø65
"D" "C"
Usage of Drain Pan
(Heat Pump)
INSTALL ATION
8
Type “ A” Scr ew