Installation
6RMI0-04C
66
Inverter Single
Check
1. Compare the flared work with the figure by.
2. If a section is improperly flared, cut it off and do
flaring work again.
Indoor unit
1. Pull the screw cap at the bottom of the indoor unit
2. Remove the chassis cover from the unit by loosing 2
screws
3. Pull back the tubing holder.
4. Remove pipe port cover and positioning the tubing
Inclined
Inside is shiny without scratches
Smooth all round
Even length
all round
Surface
damaged
Cracked Uneven
thickness
= Improper flaring =
Connecting the Piping
Chassis cover
Right
Indoor unit back side view
Tubing holder
Backwards
Left
Pipe Port
Drain hose