manualshive.com logo in svg

LG LSE4617ST, Service Manual

The LG LSE4617ST is a cutting-edge kitchen appliance that combines style and functionality. Discover all the features and information you need to maximize its potential by downloading the free service manual from manualshive.com. This comprehensive manual provides step-by-step instructions and maintenance tips for easy troubleshooting and efficient usage.

Share
Download
background image

TABLE OF CONTENTS

                                                                                         

     (

Page

)

GENERAL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  1-1 ~ 1-5

      • Important safety instructions 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  1-1 ~ 1-3

      • Model & Serial number label and tech sheet locations 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  1-4

      • Specifications 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  1-5

USING YOUR RANGE   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-1 ~ 2-8

      • General information 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-1

      • Control panel features 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-2 ~ 2-7 

          - Setting the clock 
          - To turn on/off the oven light 
          - Timer on/off 
          - Setting pad: 7 types of category 
               1) Changing hour mode on clock
               2) Convection auto conversion
               3) Thermostat adjustment 
               4) Preheating alarm light on/off
               5) Beeper volume 
               6) Temperature unit (°F or °C)
               7) Activate/deactivate the cooktop beeper
          - Bake, timed bake, delayed timed bake
          - Oven lockout
          - Self-clean
          - Power management

      • Warming drawer

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  2-8

COMPONENT ACCESS   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-1 ~ 3-33

      - Component Locations    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-1
      - Removing the back cover  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-2
      - Removing the oven relay PCB, power PCB  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-3
      - Removing the controller   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -   3-4
      - Removing the mainPCB and key PCB assembly   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-5
      - Removing knob and infinite switch  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-6
      - Removing the cooktop from the oven   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-7
      - Removing the ceramic galss cooktop from the cooktop   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-8
      - Removing the working coil plate and working coil   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-9 ~ 3-11
      - Removing the burner individually   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-12
      - Removing the Noise Filter PCB And Inveter PCB   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-13 ~ 3-14
      - Removing the box fan and blow fan   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-15
      - Removing the LED PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-16 ~ 3-17
      - Removing the cooktop main PCB   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-18
      - Removing the warm heater   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-19
      - Removing the cooling motor, thermal disk and door switch  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-20 ~ 3-21
      - Removing the broil element  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-22 ~ 3-23
      - Removing the convection element, fan blade and fan motor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-24

      - Removing the oven light & socket assembly 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-25

      - Removing the latch drive assembly   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-26
      - Removing the oven temperature sensor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-27

      - Removing & replacing the lit-off oven door and drawer

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-28~3-29

      - Removing a side panel   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-30

      - Removing the oven door handle & glass 

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-31~3-32

      - Removing the oven door gasket   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  3-33

COMPONENT TEST  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  4-1 ~ 4-10

      - Convection Motor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  4-1
      - Door locking Motor     - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  4-2
      - Micro Switch   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  4-2
      - Oven Sensor    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  4-2

Summary of Contents for LSE4617ST





















































































































Reviews:

No comments

Related manuals for LSE4617ST

Pacific PR-2011S Use, Care And Installation Manual preview
PR-2011S
Brand: Pacific Pages: 17
Verona VEFSGG30 Instruction, Use And Maintenance Manual preview
VEFSGG30
Brand: Verona Pages: 25
IKEA ISG650WS00 Use & Care Manual preview
ISG650WS00
Brand: IKEA Pages: 40
Jenn-Air PRD3030 Use & Care Manual preview
PRD3030
Brand: Jenn-Air Pages: 110
Cafe C2Y366 Owner'S Manual preview
C2Y366
Brand: Cafe Pages: 133
Smeg A11XPY-9 Manual preview
A11XPY-9
Brand: Smeg Pages: 88
Smeg A1.1 (Spanish) Manual De Uso preview
A1.1
Brand: Smeg Pages: 36
Tappan 318200753 Owner'S Manual preview
318200753
Brand: Tappan Pages: 20
Tappan Millennia TEF352BHWA Owner'S Manual preview
Millennia TEF352BHWA
Brand: Tappan Pages: 20
Jenn-Air JDRP436WP02 Installation Instructions Manual preview
JDRP436WP02
Brand: Jenn-Air Pages: 48
Bartscher SNACK 115157 Instructions For Installation, Operation And Maintenance preview
SNACK 115157
Brand: Bartscher Pages: 41
GE JB255DJWW Owner'S Manual preview
JB255DJWW
Brand: GE Pages: 56
GE JGB750EEFES Owner'S Manual preview
JGB750EEFES
Brand: GE Pages: 32
GE JGB750DEF2BB Owner'S Manual preview
JGB750DEF2BB
Brand: GE Pages: 64
GE JGB750DEF1BB Owner'S Manual preview
JGB750DEF1BB
Brand: GE Pages: 64
GE JGB800DEP Dimensions And Installation Information preview
JGB800DEP
Brand: GE Pages: 2
GE JGB750DEF Dimensions And Installation Information preview
JGB750DEF
Brand: GE Pages: 2
GE JGB770SEFSS Dimensions And Installation Information preview
JGB770SEFSS
Brand: GE Pages: 2

Brands by name

Popular brands

Load more brands