3-29
COMPONENT ACCESS
REMOVING & REPLACING THE LIT-OFF OVEN DOOR AND
DRAWER
Step. 4
Pull the drawer away from the range.
Replacing the Door
Step. 1
Pull the bearing glides to the front of the chassis glide.
Step. 2
Align the glide on each side of the drawer with the glide
slots on the range.
Step. 3
Push the drawer into the range until levers click
(approximately 2 inch).
Step. 4
Pull the drawer open again to seat bearing glides into
position.
Step. 5
Replace the two screws.
Removing the Drawer
Most cleaning can be done with the drawer in place;
however, the drawer may be removed if further
cleaning is needed. Use warm water to thoroughly
clean.
Step. 1
Fully open the drawer.
Step. 2
Remove the two screws.
Step. 3
Locate the glide lever on each side of the drawer. Push
down on the left glide lever and pull up on the right
glide lever.
CAUTION
• Disconnect the electrical power to
the range at the main fuse or circuit
breaker panel. Failure to do so can
result in severe personal injury,
death, or electrical shock.
Summary of Contents for LSE4617ST
