LG LSE4617ST, Service Manual

Page: 33 / 116

3-16
COMPONENT ACCESS
REMOVING THE LED PCB
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Pull the controller from the range.(See page 3-4)
4. Pull the Cooktop from the range(See page 3-7)
5. Remove the ceramic glass cooktop(See page
3-8)
6. Remove the Working coil plate(See page 3-9,10)
7. To remove the LED PCB
a) Remove the 4 Screws from the LED PCB
Case.
b) Pull the LED PCB Case from the working coil
plate.
c) Pull the LED PCB from the LED PCB Case.
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
LED PCB Screw 4EA