manualshive.com logo in svg

LG LSE4613BD, Service Manual

The LG LSE4613BD is a sleek and innovative range that offers top-notch performance and a perfect blend of style and functionality. With its cutting-edge features and user-friendly interface, this appliance is a must-have for any modern kitchen. To get the most out of your LG LSE4613BD, download the Service Manual from manualshive.com for free.

Share
Download
background image

(Page)

GENERAL- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1 ~ 1-5

• Important safety instructions  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1 ~ 1-3
• Model & Serial number label and tech sheet locations  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4
• Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-5

USING YOUR RANGE  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1 ~ 2-7

• General information  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1
• Control panel features  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2 ~ 2-7

- Setting the clock
- To turn on/off the oven light
- Timer on/off
- Setting pad: 5 types of category

1) Convection auto conversion
2) Thermostat adjustment
3) Preheating alarm light on/off
4) Beeper volume
5) Temperature unit (°F or °C)

- Bake, timed bake, delated timed bake
- Oven lockout
- Changing hour mode on clock
- Self-clean

COMPONENT ACCESS  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1 ~ 3-21

- Component Locations  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1
- Removing  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2
- Removing the oven relay PCB, power PCB- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3
- Removing the controller  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-4
- Removing the mainPCB and key PCB assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-5
- Removing knob and infinite switch- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6
- Removing the ceramic glass cooktop and the surface element- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7
- Removing the cooling motor, thermal disk and Rdoor switch- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-8 ~ 3-9
- Removing the broil element  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-10~ 3-11
- Removing the convection element, fan blade and fan motor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-12
- Removing the oven light & socket assembly  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-13
- Removing the latch drive assembly  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-14
- Removing the oven temperature sensor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-15
- Removing & replacing the lit-off oven door and drawer- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-16~3-17
- Removing a side panel  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-18
- Removing the oven door handle & glass  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-19~3-20
- Removing the oven door gasket   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-21

COMPONENT TEST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1 ~ 4-13

- Convection Motor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1
- Door locking Motor   - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
- Micro Switch  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
- Oven Sensor  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2
- Door switch  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
- Outer Broil heater - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
- Inner Broil heater - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
- Convection heater  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3
- Oven lamp  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4
- Infinite switch (LR, RR Switch) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5
- Infinite switch (CR Switch)  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-5

TABLE OF CONTENTS

Summary of Contents for LSE4613BD

























































































Reviews:

No comments

Related manuals for LSE4613BD

Toyotomi KR-47 Operating Manual preview
KR-47
Brand: Toyotomi Pages: 92
Dimplex PLX 1000 Installation And Operating Instructions Manual preview
PLX 1000
Brand: Dimplex Pages: 16
Philips Sonicare DiamondClean HX9392/08 Quick Start Manual preview
Sonicare DiamondClean HX9392/08
Brand: Philips Pages: 2
Philips Sonicare DiamondClean HX9342 Specification preview
Sonicare DiamondClean HX9342
Brand: Philips Pages: 3
Philips Sonicare DiamondClean Smart Faq preview
Sonicare DiamondClean Smart
Brand: Philips Pages: 7
Philips Sonicare DiamondClean HX9333 Quick Start Manual preview
Sonicare DiamondClean HX9333
Brand: Philips Pages: 6
Philips Sensiflex HX2014 Replacement Parts preview
Sensiflex HX2014
Brand: Philips Pages: 2
Philips Sonicare DiamondClean Smart HX9924/06 Manual preview
Sonicare DiamondClean Smart HX9924/06
Brand: Philips Pages: 46
Philips Sonicare DiamondClean Smart HX9924/05 Manual preview
Sonicare DiamondClean Smart HX9924/05
Brand: Philips Pages: 56
Philips Sonicare DiamondClean Smart HX9901/05 Manual preview
Sonicare DiamondClean Smart HX9901/05
Brand: Philips Pages: 56
Philips Luxury A6 Directions For Use Manual preview
Luxury A6
Brand: Philips Pages: 28
Philips Sonicare DiamondClean Smart HX9903/01 Manual preview
Sonicare DiamondClean Smart HX9903/01
Brand: Philips Pages: 82
Philips sensiflex HX2225 User Manual preview
sensiflex HX2225
Brand: Philips Pages: 52
Philips Sonicar AirFloss Ultra HX8331/11 User Manual preview
Sonicar AirFloss Ultra HX8331/11
Brand: Philips Pages: 56
Philips hx9110 User Manual preview
hx9110
Brand: Philips Pages: 64
Philips Sonicare Quick Manual preview
Sonicare
Brand: Philips Pages: 156
Philips Sonicare DiamondClean HX9372/04 User Manual preview
Sonicare DiamondClean HX9372/04
Brand: Philips Pages: 228
Philips sensiflex HX1510 Manual preview
sensiflex HX1510
Brand: Philips Pages: 162

Brands by name

Popular brands

Load more brands