LG LRY-517, Owner'S Manual

Page: 17 / 64

17
RF coaxial connection
Connect the RF.OUT jack on the VCR/DVD Recorder
to the antenna in jack on the TV using the supplied
75-ohm Coaxial Cable
(R) .
How to set the VCR/DVD Recorder’s
RF output channel
1. When the VCR/DVD Recorder is turned off, press
and hold CH (
V/v
) on the front panel for more
than five seconds. “RF-03” or “RF-04” appears in
the display window.
2. Press CH (
V/v
) to change the RF output channel
(CH 03 or CH 04). Tune the TV to this channel.
3. Turn off the VCR/DVD Recorder.
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
VCR/DVD Recorder to the video in jack on the TV
using the video cable
supplied (V) .
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the VCR/DVD Recorder to the
audio left/right in jacks on the TV
(A1) using the
supplied audio cables.
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
Optional TV Connections
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the RF.OUT
(R) or
DVD/VCR OUT (A, V) jacks.
S-Video connection
1. Connect the S-VIDEO OUT jack on the VCR/DVD
Recorder to the S-Video in jack on the TV using
the optional S-Video cable
(S) .
2. Connect the Left and Right AUDIO OUT jacks of
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the supplied audio cables
(A2) .
Component Video / Progressive Scan
connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the VCR/DVD
Recorder’s progressive scan output for the highest
video resolution possible.
1. Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the VCR/DVD
Recorder to the corresponding in jacks on the TV
using an optional Y Pb Pr cable
(C) .
2. Connect the Left and Right AUDIO OUT jacks of
the VCR/DVD Recorder to the audio left/right in
jacks on the TV
(A2) using the supplied audio
cables.
Notes:
• Set Progressive Scan option to “ON” in the General
menu, see page
21 .
• Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
• If your TV does not accept the Progressive Scan format,
the picture will appear scrambled.
• When you use Component Video signal, set the
Progressive Scan to “Off” on the General menu.
Audio Connection
Audio Connection
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the VCR/DVD
Recorder to the audio left and right in jacks on your
amplifier, receiver, or stereo system using the audio
cables
(A ) supplied .
INTRODUCTION
HOOKUP
PLA
YBACK
RECORDING
EDITING
REFERENCE
Amplifier (Receiver)
Rear of VCR/DVD Recorder
A X O
R L
AUDIO INPUT DIGITAL INPUT
COAXIAL
DIGITAL INPUT
OPTICAL