2-2. Dispenser use selection
You can select water or ice.
❉
Please select water, slice ice and square ice by pressing button as you desire.
❉
Please press the push button lightly by catching and pushing in cup.
• The border line is indicated for the selected function.
• “Tak!” sounds if 5 seconds pass after ice comes out.
It is sound that the outlet of ice is closed.
REFERENCE : Please wait for 2-3 seconds in order to take final ice slices or drops of
water when taking out cup from the pressing switches after taking ice
or water.
2-3. Automatic ice maker
• The automatic ice maker can automatically make 8 pieces of ice cube at a time, 80 pieces a day. But these quantities may
be varied according to various conditions including how many times the refrigerator door opens and closes.
• Ice making stops when the ice storage bin is full.
• If you don’t want to use automatic ice-maker, change the ice-maker switch to ON-OFF.
If you want to use automatic ice-maker again, change the switch to OFF-ON.
NOTE : It is normal that a noise is produced when ice made is dropped into the ice storage bin.
2-4. When ice maker does not operate smoothly
Ice is lumped together
• When ice is lumped together, take the ice lumps out of the ice storage bin, break them into small pieces, and then place
them into the ice storage bin again.
• When the ice maker produces too small or lumped together ice, the amount of water supplied to the ice maker need to
adjusted. Contact the service center.
✻
If ice is not used frequently, it may lump together.
Power failure
• Ice may drop into the freezer compartment. Take the ice storage bin out and discard all the ice then dry it and place it
back. After the machine is powered again, crushed ice will be automatically selected.
The unit is newly installed
• It takes about 12 hours for a newly installed refrigerator to make ice in the freezer compartment.
2-5. Super freezer
Please select this function for prompt freezer.
• “On” or “Off” is repeated whenever pressing button.
• The arrow mark graphic remains at the On status after flickering 4 times when
selecting Special Refrigeration “On”.
• Super freezer function automatically turns off if a fixed time passes.
2-6. Lock
This button stops operation of different button.
• Locking or Release is repeated whenever pressing the .
• Pressing the other button when selecting ‘LOCK’, the button does not operate.
MICOM FUNCTION
- 27 -
Ex) In selecting
"On"
Ex) In selecting
"Off"
Ex) In selecting
"LOCK"
Ex) In selecting
"LOCK" again
ON
SUPER FRZ
OFF
LOCK CONTROL
LOCK
UNLOCK
DISPENSER
WATER
CUBED
CRUSHED
Pressing
Switch
DISPENSER
SUPER FRZ
LOCK CONTROL
Summary of Contents for LRSC21934SW
