23
Operating the Projector
Focusing and Positioning the Screen Image
Focusing and Positioning the Screen Image
When an image appears on the screen, check if it is in proper focus and fits well to the screen.
●
To adjust the focus of the image, rotate the focus ring which is the outer ring on the lens.
●
To adjust the size of the image, rotate the zoom ring which is the inner ring on the lens.
To raise or lower the image on the screen, extend or retract the foot at the bottom of the projector
by pushing foot adjuster button as below.
1.
Press the foot adjuster button while you support the other side of the projector. This unlocks the foot and can make it
move freely. Take care not to drop the projector.
2.
While pressing the foot adjuster button, raise or lower the projector to place the screen image in the proper position.
3.
Release the button to lock the foot in its new position.
4.
To fine-tune the height of the projector, rotate the front foot to raise or lower it.
After raising the front foot, do not press down on the projector.
POWER
MENU
SOURCE
BLANK
ENTER
VOL-
VOL+
Focus ring
Zoom ring
Push
Summary of Contents for LP-XG2
Page 2: ...LCD PROJECTOR LCD PROJECTOR 1 ...
Page 45: ...44 Memo ...
Page 46: ...45 Memo ...
Page 48: ...P NO 3828VA0245A a 373 026F ...
