61
Installation
Installing the Navigator “PC Portal”
It should install the Microsoft .Net Framework 2.0 for
the operating system from the install screen.
1. Insert the navigator CD into the PC's CD-ROM
drive. The “PC Portal” Installation wizard prompts
you to select the language used for the installation
process. When you have selected a language,
click “OK”.
2. Read the Welcome message and click “Next”.
3. From the Select Directory screen, either accept
the recommended default directory or browse to a
different directory to install the “PC Portal”.
Click “Next”.
4. If you want to change the directory location before
installing, click “Back” and change the language
selection. Also if you want to change the language
selection, you must start again after click
“CANCEL” in a “WELCOME” message. When you
are ready to install the “PC Portal”, click “Next”.
The Installation Status box displays the progress
of the installation process.
5. When the installation is complete, click the “Finish”
button. Then, the unit must be connected with a
USB interface.
6. After PC Portal is finished installing, the “Maps
installer’ program is installed. This procedure is
similar to PC Portal install.
7. When the installation is complete, the selected
language box appears.