21
Connecting devices
Installing the remote control on a Left-Hand-Drive
vehicle (CANADA only)
When the remote control is installed on a Right-Hand
-Drive vehicle, the horizontal position are inverted.
1.
Secure Cover holder
to the inner
circumference of the steering wheel with belt
.
Fit the Cover holder
to the steering wheel so
that the arrow-marked side faces the driver as
shown by picture.
2.
Cut the extra portion of the belt at the center of
the cover holder.
3.
Install holder wheel
on the cover holder
and secure with screws
.
Tighten the screw with driver.
4.
Install the remote control unit
in the holder.
When removing the remote control unit from the
holder, move the corrugated release section
toward the steering wheel as far as possible
before sliding the remote control unit toward you.
e
d
a
b
a
c
a
a
c
e
b
d
a
