23
Connecting devices
7.
Plug the small end of the cigarette lighter
adapter into the power supply connector at the
side of the unit.
8.
Plug the other end into your vehicle’s 12-24V
(cigarette lighter) socket.
9.
Adjust the angle of the mount by rotating the hold-
er of the suction-cup mount up and down or from
side to side.
10. When you finish, tighten up the knobs again.
• This unit and its cigarette lighter adapter are
designed for use in vehicles that have 5 ± 0.2V,
negative ground electrical systems.
(This is a standard for most vehicles.)
If your vehicle has a different type of electrical
system, the DC power system cannot be used.
• When attaching the mount, remove impurities from
the surface before attaching, and press the lever to
avoid falling.
• Adjust the direction of the mount to prevent it from
disturbing the driving.
• Adjust it to an angle you can see well.
• Be careful of not to make the unit fall from
windshield when you drive.
• The arm of the mount may vibrate. Attach the mount
close to the dashboard as best as you can.
