10
AUDIBLE SIGNALS
Audible signals are available to guide you
when setting and using your oven:
••
A beep will sound each time you touch a button.
•
4 beeps signals the end of a cooking cycle.
INTERRUPTING COOKING
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan stops,
but the light stays on.
To restart cooking, close the door and touch
START/Enter.
If you do not want to continue cooking, open
the door and touch STOP/Clear.
SLIDE OUT VENTILATION
Push bottom of unit to extend hood and back side
down , Extended hood is more powerful to gather
smoke and steam from cooktop.
GLASS TOUCH CONTROLLER
- Touch the middle of letter or number to activate.
- If you touch the button with a fingernail or fingertip,
the controller may not sense it is being touched.
- If the controller or your hands are wet it may not sense
your touch.
- Remove gloves prior to touching the controller.
- Use the child lock feature when cleaning the controller
to avoid unintended activation.
LIGHT HI/LOW/OFF
The button on the right of the control panel controls
the cooktop light.
Example: To set the Lamp for ON
1.
Touch
Light Hi/Low/Off.
To turn on, touch once.
"Light" will flash in display,
then stay on.
2.
Touch
Light Hi/Low/Off.
To turn off, touch button
again. "Light" will disappear
from the display.
VENT 4 SPEED
When the fan is on, touch this
button to toggle the fan speed.
Fan speed will change in
sequence from slow, low, high,
turbo and back to slow.
The
Energy Saving
feature saves energy by turning
off the display by pressing the Energy Saving button.
The display will automatically turn off after 5 minutes
of idleness.
1. Touch
Energy Saving
to
turn the display off.
2.
Touch
Energy Saving
to
turn the display on.
ADD 30 SEC
A time-saving button, this simplified control lets you
quickly set and start microwave cooking without the
need to touch
START/Enter
.
Touch
Add 30 Sec.
4 times.
The oven begins cooking
and the display shows time
counting down.
NOTE:
If you continue to touch
Add 30 Sec.
, it will
add 30 seconds up to 99 min 59 seconds.
Example: To set ADD 30 SEC for 2 minutes.