36
Additional Operation - VCR part
On Screen Display
You may easily display the clock or tape counter and
tape remaining, day, month, year, day of week,
programme channel, tape speed and VCR function on
the TV screen.
If a recording is taking place these On Screen Displays
will not be recorded onto the tape.
11
Press CLK/CNT to display.
2
2
Press CLK/CNT repeatedly to display the tape
counter.
During playback or recording, the tape remaining is
displayed with the tape counter.
3
3
After 3 seconds the display will clear from the
TV screen, leaving only the clock or tape count-
er and tape remaining on the TV screen.
Press CLK/CNT again to remove all displays
from the TV screen.
The tape remaining will only be accurate for
E-180 and E-240 tapes.
The tape remaining indicator may not be
accurate, since it depends on the type or condition
of tape used. Also, the tape remaining indicator is
not displayed just after a cassette has been insert-
ed, or after playback or recording has begun.
Tape Counter Memory Stop
The
Digital Tape Counter
can be displayed on your TV
screen instead of the time by pressing
CLK/CNT
on the
remote control.
The Digital Tape Counter indicates the relative positions
of recordings on the tape.
11
Press CLK/CNT repeatedly until the counter is
displayed on the TV screen.
2
2
Press CLEAR to set the counter to 0:00:00.
Press PLAY (
H
H
) to start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
3
3
Press STOP when playback or recording is com-
plete.
4
4
Press BACKWARD.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Please note: If FORWARD is pressed when
counter mode indicates a negative value, the tape
will not stop.
Friendly User Guide (Video Doctor)
This feature informs you that there is a problem with
your DVD/CD/VCR receiver. These error messages will
appear on the TV screen.
11
Press
i
.
Press
F
F
or
G
G
to select Dr. and press OK.
2
2
Press
D
D
or
E
E
to check a problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O
NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
O
2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O
ARD1 26 10:00~11:00 SP
Shows the current status of timer recording.
3
3
Press
i
to remove the menus from the TV
screen.
ez (easy) Repeat
BY pressing & holding REPEAT during play back, the
holding section is replayed twice automatically.
11
During play back, press & hold REPEAT at he
point where repeat play is to be concluded.
Then, your DVD/CD/VCR receiver will go into
reverse search.
2
2
Release REPEAT at the point where repeat play
is to start.
Holding section is replayed twice automatically.
ote
Pressing REPEAT again during repeat play, the
DVD/CD/VCR receiver will return to normal play.
STOP
SP
ARD
STEREO
STEREO
1. 01. 03 WED
12:00
VCR
Function/
Tape Speed
Day/Month/
Year/Day of
Week
Clock/Tape
Counter &
Tape
remaining
Programme
Channel
i
Dr.
VCR
VIDEO DOCTOR
OK
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME