10
Connections
ANTENNA
GND
AM
S-VIDEO OUT
DVD/VCR
OUT
AERIAL
FM
SPEAKER
FRONT
(R 4 )
(R 4 )
REAR
CENTER
( 4 )
REAR
(L 4 )
FRONT
(L 4 )
SUB
WOOFER
( 8 )
VHS IN+OUT/DVD OUT
EURO AV1
AUDIO/VIDEO
EURO AV2
AUDIO/VIDEO
RF . OUT
S-VIDEO
INPUT
AERIAL
Rear of TV
S
A
D
E
R
SCART INPUT
Set Top Box(or another VCR)
Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD/VCR receiver. Use one of the connec-
tions described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD/VCR receiver is connected
directly to the TV. Select the correct AV input on your
TV.
– Do not connect your DVD/CD/VCR receiver to TV via
your VCR. The DVD image could be distorted by the
copy protection system.
Basic connections (AV)
11
Connect the
EURO AV1 AUDIO/VIDEO
on the rear
panel of the DVD/CD/VCR receiver to the scart input
socket on the TV using a SCART lead (
E
).
2
2
You can connect such a Set Top Box (or another
VCR) to the DVD/CD/VCR receiver (
D
).
Basic connections (RF)
11
Connect the aerial cable (
A
) from your indoor/ out-
door aerial to
AERIAL
jack on the rear panel of
DVD/CD/VCR receiver.
2
2
Connect the supplied RF cable (
R
) from the
RF. OUT
jack on the rear panel of DVD/CD/VCR
receiver to your television’s Aerial Input.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD/VCR
receiver to the S-VIDEO IN jack on the TV using the S-
Video cable
(S)
.
otes
The signal of S-VIDEO OUT jack will output only
when the function mode is selected to CD/DVD.
When you connect the DVD/CD/VCR receiver to your
TV, be sure to turn off the power and unplug both
units from the wall outlet before making any connec-
tions.
TV & Set Top Box (or another VCR Connections)