12
Safety Precautions
■ Precautions common to the main unit, built-in battery,
charging equipment, au Nano IC Card (LTE), peripheral
devices
Be sure to read the following hazards before
use.
Do
Be sure to use only the specifi ed peripheral devices.
Use of other peripheral devices might cause
overheating, fi re, rupture, fault, or leakage of liquid.
Don’t
Do not use, store, or leave the product in hot places
(e.g. by the fi re, near a heater, under a kotatsu, in
direct sunlight, in a car in the hot sun). Doing so
might cause ignition, rupture, fault, fi re, or injury.
Do
Before entering an area where fl ammable gas is
generated such as a gas station, be sure to turn
off this product. Also, do not charge the product.
Failure to observe these precautions might cause
the gas to catch fi re. In addition, when using Osaifu-
Keitai
®
at a gas station, be sure to turn off the
power in advance. (If Osaifu-Keitai
®
has been locked,
cancel the lock before turning off the power.)
Don’t
Do not put the product in a cooking apparatus such
as a microwave oven or a pressure vessel. Doing so
might cause ignition, rupture, fault, fi re, or injury.
Don’t
Do not throw the product into a fi re or heat it. Doing
so might cause fi re, rupture, or fi re.
Don’t
Do not short-circuit the connection terminals.
Do not allow conductive foreign objects (metal
fragments, pencil leads, etc.) to come into contact
with or get inside the connection terminals. Doing
so might cause fi re, or a fault.
Don’t
When using metal accessories, etc., make sure
not to allow the metal part come in contact with
the connection terminals or power outlet. Doing so
might cause electric shock, fi re, injury, or a fault.
Don’t
Do not expose the camera lens to direct sunlight for
an extended period. Doing so might cause ignition,
rupture, or fi re by the light-collecting mechanism of
the lens.
Not
disassembly
The customer is not allowed to disassemble,
modify, or repair the product.
Doing so might cause a fault, fi re, electric shock,
or injury. The Company is not liable even in the
event of any non-conformities arising on product
or peripheral devices as a result of modifi cation,
etc. Modifi cation of product is in violation of the
Wireless Telegraphy Act.
