3-10 HOW TO REMOVE PULL OUT DRAWER
IMPORTANT:
To avoid possible injury or damage to the
product or your property, please use two people to perform
the following instructions:
1. Removing the Pull Out Drawer
•
Pull the drawer out to maximum extension. Remove the
bottom rack (1) by tilting it back a little and then lifting it
•
Remove the screws (3) from both sides of the rail track.
1
off the railing tracks.
3
CAUTION: When removing the drawer, do not hold the
handle. If it comes off, it could cause personal injury.
CAUTION: To place the drawer on the floor, take care
not to damage the floor or hurt your feet with the sharp
edges on the side with the hinges.
•
With both hands, hold both sides of the door and pull up
to separate it.
•
With both hands, hold the center of the bar and push it
in so that it is fit to both rails simultaneously.
2. Installing the Pull Out Drawer
•
With both hands, hold the center of the bar and pull it
outward so that the two rails extend out at the same
time.
- 13 -
Summary of Contents for LFC20770SB
