27
Operation
-
COLOR TEMP: Use [Near] or [Far] button
to select a function.
>
INDOOR: The color temperature
range for the proper white balance is
approximately 3 200 K.
>
OUTDOOR: The color temperature
range for the proper white balance is
approximately 5 100 K.
-
RED: Set the desired red value.
-
BLUE: Set the desired blue value.
Day/Night setting
1. Select [DAY/NIGHT] option on the [CAMERA SET]
menu.
2. Use [Near] or [Far] button to select mode for day/
night function.
•
AUTO: You will be able to change the Day/
Night mode automatically.
-
D/N LEVEL: Use [Near] or [Far] button to
select a level.
-
DWELL TIME: Use [Near] or [Far] button
to select a dwell time.
-
BURST MODE: Select [ON] or [OFF] to set
the color burst in Night status.
Note:
If you set the AGC to [OFF] or the SHUTTER
is set to one of the SHUTTER options except
AUTO on the [EXPOSURE] menu, the AUTO
mode of the DAY/NIGHT function is not
available and [---] mark is displayed.
•
DAY: Color mode enabled.
•
NIGHT: Black-and-white mode enabled.
Motion Detection setting
The motion detection detects the moving objects in
the scene by monitoring changes in brightness level.
You can select the level of sensitivity for motion
detection to 4 zone.
1. Select [MOTION DET] option on the [CAMERA
SET] menu.
2. Use [Near] or [Far] button to select a [ON]
and press [Open] or [Close]. The MOTION
DETECTION menu appears.
•
SMART MD : You can detect the movement of
objects easily by displaying motion mask.
•
REGIONAL MD : Use [Near] or [Far] button to
select [ON] then press [Open] or [Close].
-
Use [Near] or [Far] button to select a zone
number (ZONE1 to ZONE4) on the [ZONE
NUMBER] option.
-
Use [Near] or [Far] button to set up the ON
or OFF on the [ZONE STATE] option. If you
set to ON, the zone frame appears on the
center of the monitor.
-
Use [In] or [Out] to select an option then
use [Near] or [Far] button to adjust the
option
>
WIDTH: Enlarge or decrease the
horizontal size of the zone frame.
>
HEIGHT: Enlarge or decrease the
vertical size of the zone frame.
>
MOVE X: Moves horizontal position of
the zone frame.
>
MOVE Y: Moves vertical position of the
zone frame.
3. Use [SENSITIVITY] option to obtain the optimum
detection level.
