23
Operation
Accessing setup menus
To access the setup menus using the keys on a
LKD1000 controller, do the following:
1. Select CAM (Camera) icon in the main menu and
then press ENTER. The camera ID input menu will
be displayed.
CAM
PRESET /CAM1
Please Enter Camera ID
Target CAM ID : _
2. Enter the connected camera ID to control the
camera connected to the LKD1000 controller
directly and then press ENTER. The camera
control menu will be displayed.
CAM
PRESET /CAM1
Please Enter Camera ID
Target CAM ID : _
3. Press [Cam OSD] button to display the camera
setup menu.
At this point, you have access to the camera setup
menu.
General Operation
1. Use [In] or [Out] button to select an option then
press [Open] or [Close] button.
Submenu appears on the monitor.
2. Use [In] or [Out] button to select a submenu
option.
3. Use [Near] or [Far] button to select a value.
4. Select [EXIT] option then press [Open] or [Close]
to exit the setup menu. In the submenu, use [In] or
[Out] button to select the [EXIT] then use [Near]
or [Far] button to select a mode and press [Open]
or [Close] to exit the setup menu.
•
RET: Return to the previous.
•
TOP: Return to the CAMERA SETTING menu
screen.
•
END: Exit the setup menu.
Focus setting
Focus Mode setting
The camera adjusts the focus automatically by
sensing the center of the picture.
Select [FOCUS MODE] option on the [FOCUS] menu,
then select the following mode.
• AUTO: Auto-focus is activated automatically.
• ONE PUSH: The focus is activated manually. If
the camera is received auto-focus command, the
camera is activated Auto-focus mode and the
focus is set automatically and then the focus mode
is automatically changed to manual mode.
• ZOOM TRIG: The focus is activated manually.
If you change the zoom, the focus is activated
Automatically and then the focus mode is
automatically changed to manual mode.
• MANUAL: Focus is activated only when the
FOCUS (NEAR or FAR) keys on the controller is
pressed.
