background image

55

Making

calls/Receiving

calls

Making calls/Receiving calls

Activate Public mode (power off)

1. 

*25251

]

A

• Public mode (power off) is set. (Nothing is changed in
the Stand-by display.)
• After setting Public mode (power off) and turning off
the power, the guidance “The person you are calling is
currently in an area where use is prohibited. Please try
again later.” is played back for incoming calls.

a

To release Public mode (power off)

*25250

]

A

a

To check Public mode (power off) for the setting,

*25259

]

A

When Public mode (power off) is activated

When an incoming call is received at your  phone,
the guidance is played back to the caller telling that you
are currently in an area where use is prohibited, and then
the call is disconnected. When there is an incoming video-
phone call, the video-guidance of the public mode is
played back to the caller, and then the call is
disconnected. 
• This setting is continued until you release the setting by

dialing “

*

25250”. If you just switch on, this setting is not

released.

• The Public mode (power off) guidance is played back

even when you are out of the service area or radio
waves do not reach.

Activating between network services and Public 
mode (power off)

If you use Public mode (power off) and Network service at
the same time, the operation will be activated as follow.
Depending on the setting or calling, the network service
can be preferred, so the activation of Public mode (power
off) or the record of missed call may not be displayed.

a

Voice Mail

a

Call Forwarding Service

Response to Incoming Video-phone calls

Response to Incoming Voice calls

Plays back the Public mode

(power off) guidance to caller, and

then the call is connected to the

Voice mail Service Center.

1

The call is terminated without being

connected to the Voice Mail

Service Center.

2

Response to Incoming Voice calls

Response to Incoming Video-phone calls

Plays back the Public mode

(power off) guidance to caller, and

then the call is forwarded to the

forwarding destination.

1

The

guidance depends on setting of

Call Forwarding Service.

Does not play back the video

guidance for public mode (power

off), and the call is forwarded to

the forwarding destination. If the

destination does not support

video-phone call, the call is

disconnected.

Summary of Contents for L704I




























































































































Reviews: