LG L704I User Manual Download Page 20

Page: 20 / 123

Confirming

before

use

≤

égópëOÇÃämîF

Confirming before use

Information

• Attach/remove the battery pack with the phone closed

and held in your hand after you turn off the power. In addition,

If you attach/remove the battery pack forcibly, it may damage

the charging connector of battery.

• Take care not to attach/remove the rear cover. Note that if the

rear cover is forcibly depressed, the slot of the rear cover may

be damaged.

• For details about the battery, see the manual for Battery Pack L02.

Charging the Phone

Charging

Connect specified AC Adapter (option) to charge the
battery after attaching the battery pack to the
phone (P38). You need AC Adapter 01 for both
overseas and domestic usage (option) separately when
using the phone overseas.

1. Open the cover

※

of the external connector terminal

of the phone

※

: You can rotate it forward or backward when it is open.

2. Place the arrow side of the AC adaptor connector

up and keep the connector level with head
set to connect in the arrow direction

3. Insert the AC adapter’s plug into a power socket

Summary of Contents for L704I




























































































































Search results

Summary of Contents for L704I

Reviews:

Related manuals for L704I

Brands by name

Popular brands

LG L704I, User Manual

Search results

Summary of Contents for L704I

Reviews:

Related manuals for L704I

Brands by name

Popular brands