LG L704I User Manual Download Page 22

Page: 22 / 123

Confirming

before

use

≤

égópëOÇÃämîF

Confirming before use

Removing the AC Adapter

After charging completes, disconnect the AC adapter from
the phone.

1. Disconnect the connector of the AC adapter from

the power socket

2. While pressing the release buttons on both sides

of the connector, remove it horizontally from the
phone in the direction of the arrow

• Do not pull the connector forcibly. Malfunction may

result.

3. Close the cover of the external connector terminal

of the phone

Checking the Battery Level

When turning the power on, the battery level (estimate)
icon appears.

• The Battery Level display indicates just an estimate of

the battery level.

: Almost full

: Getting low

: Almost empty. Charge the battery immediately.

When You Need to Charge the Battery

If the battery is completely flat, a message appears,
flickers, and the battery alarm sounds. If you press

, the

message disappears and the battery alarm stops.

Information

• If you set “Manner mode” or “Original manner mode” and set

battery alarm to OFF, the alert tone does not ring.

Precautions on the Battery Pack

Be sure to use the battery pack dedicated to the
phone.

Summary of Contents for L704I




























































































































Search results

Summary of Contents for L704I

Reviews:

Related manuals for L704I

Brands by name

Popular brands

LG L704I, User Manual

Search results

Summary of Contents for L704I

Reviews:

Related manuals for L704I

Brands by name

Popular brands