ASSEMBLE THE SURFACE BURNERS
CAUTION:
DO NOT operate the burners without all parts in place.
• Place the burner caps and heads on the cooktop.
• Make sure that the caps and heads are placed in
the correct locations.
• Make sure the hole in the burner head is positioned
over the electrode.
CHECK IGNITION OF SURFACE BURNERS
Operation of all cooktop burners should be checked after the COOKTOP and gas supply lines
have been carefully checked for leaks.
ELECTRIC IGNITION
• Select a top burner knob, push down and then turn counterclockwise to the “LITE” position.
• You can hear a clicking sound indicating proper operation of the spark module.
• Once the air has been purged from the supply lines, burner should ignite within 4 seconds.
• After burner ignites, rotate knob out of the “LITE” position. Try each burner in succession until
all burners have been checked.
QUALITY OF FLAMES
• The combustion quality of burner flames needs to be confirmed visually.
• If burner flames look like A , call for service. B or C is normal burner flames, depending on the
type of gas you use.
• With LP gas, some yellow tipping on outer cones is normal.
INSTALLATION INSTRUCTIONS
-16-
LGE Internal Use Only
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
A Yellow flames
Call for service
B Yellow tips on outer cones
It is normal for LP gas
C Soft blue flames
It is normal for natural gas
Summary of Contents for HG7522KR.ABDELGA
Page 46: ......
