- 15 -
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
INDOOR
OUTDOOR
Sill Support
Nut
Bolt
2
4
3
INDOOR
OUTDOOR
11
6
7
2
5
Frame Guide
About 1/2"
Screw(Type A)
Cabinet
6
2
About 1/2"
Screw(Type B)
5
Screw(Type A)
Sill support
Sash track
Front Angle
Type C
Screw(Type B)
Sill support
3. Loosely assemble the sill support using the parts in
Figure 21.
4. Select the position that will place the sill support
near the outer most point on sill (See Figure 22)
NOTE
: Be careful when you install the cabinet (frame
guides
are broken so easily).
5. Attach the sill support to the cabinet track hole in
relation to the selected position using 2 Type A
screws in each support(See Figure 22).
6. The cabinet should be installed with a very
slight
tilt(about
1
/
2
") downward
toward the outside (See
Figure 23).
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by driving the
screws
(Type B: Length sixteen millimeters and
below.) through the front angle into window stool.
8. Pull each Frame curtain fully to each window sash
track, and repeat step 2.
9. Attach each Frame curtain the window sash using
screws
(Type C).(See Figure 24)
CAUTION
:
DO NOT DRILL A HOLE IN THE
BOTTOM PAN.
The unit is designed to operate with
approximately 1/2" of water in bottom pan.
Figure 21
Figure 22
Figure 23
Figure 24
