DirectCD
TM
v2.5b(s)
Operation
12
Emergency
Eject
How to Use the Discs
When using CD-ROM discs, CD-R discs, DVD discs or CD-RW discs,
don’t attach any stickers or labels to the discs. It could cause read and
write errors, but data on the disc may be lost due to damage to the disc
itself.
The Discs in this unit operate at a very high speed!
DO NOT use damaged, cracked or warped discs. The drive’s optical unit
may be damaged if they break.
DO NOT use non-standard discs. NON-standard discs may not play or
store data properly.
This drive has a feature that allows the CD to be ejected manually if this
becomes necessary such as failure of the drive or a power outage.
NOTE:
Don’t use this feature except in an emergency.
1) Turn the power to OFF.
2) Poke a fine-tipped object (such as a straightened heavy duty paper
clip) into the small hole above the eject button. The front door will
pop open and the disk tray will come partway out.
3) Pull the front door to open it all the way, then grip the disc tray
between thumb and forefinger and gently pull it straight out.
NOTE:
This feature is a last measure to be used only in an emergency.
Using it excessively will cause malfunction.
* If you cannot get a good grip on the disc tray with your fingers, use a
steel binder clip or spring clamp to pull it out.
