![background image](http://html.mh-extra.com/html/lg/gcc-4521b/gcc-4521b_owners-manual_211117009.webp)
6
To Install as a Slave Drive
To install the drive as a Slave, change the jumper setting on the rear panel to SL.
Connecting the Power Connector
Connect the power cable from the computer’s power supply to the socket on the drive unit, fitting
the connector firmly into the power in connector. If there is no spare power cable available in the
computer, you will have to purchase a splitter cable of a suitable type.
Connecting the Interface Connector
Connect the 40-pin IDE cable to the back of the CD-RW/DVD-ROM Drive, making sure the
coloured (red) stripe on the IDE cable is connected to pin 1 on the CD-RW/DVD-ROM drive. Pin
1 is closest to the Power Connector.
Slave drive
(CD-RW/
DVD-ROM drive)
(Jumper set to Slave)
Master drive
(Booting hard disk)
- OR -
DIGITAL
ANALOG
INTERFACE
POWER
D
R
C S M
S L A
G L
G
39
1
+5
+12
GND
40
2
AUDIO
AUDIO
Primary
connector
Secondary
connector
Master drive
(Other IDE drive)
Slave drive
(CD-RW/
DVD-ROM
drive)
(Jumper set
to Slave)
DIGITAL
ANALOG
INTERFACE
POWER
D
R
C S M
S L A
G L
G
39
1
+5
+12
GND
40
2
AUDIO
AUDIO
DIGITAL
ANALOG
INTERFACE
POWER
D
R
C S M
S L A
G L
G
39
1
+5
+12
GND
40
2
AUDIO
AUDIO
Master drive
(Booting hard disk)
DIGITAL
AUDIO
ANALOG
AUDIO
INTERF
ACE
POWER
D G
39
40
1
+5
GND
+12
2
C S M
S L A
R G L
+5
GND
+12
POWER
Beveled edge up
NOTE
: Improper connection may damage the
drive and void the warranty. Generally, the
power connector can only fit one way.
DIGITAL
AUDIO
ANALO
G
AUDIO
INTERF
ACE
POWER
D G
39
40
1
+5
GND
+12
2
C S M
S L A
R G L
Pin1
Red-edge
NOTE
: Generally, the IDE connector is keyed
and will only fit one way.